Basic Info.
Output Type
AC Three Phase
Certification
CE, TLC, ISO, CCC
Voltage
480V,440V,400V, 380V,230V
Transport Package
Standard Export Packing
Product Description
Manufacturer price supply biomass fluidized bed gasifier for syngas generator
Biomass gasification power generation is a new renewable energy equipment besides solar energy and wind energy. The main technology of biomass gasification power generation system is the pyrolysis and oxidation of biomass fuels. After pyrolysis at high temperature, biomass fuels react to produce combustible synthetic gases, which can directly drive generators to generate electricity after purification. According to different principles, biomass gasifier can be divided into upper suction fixed bed, lower suction fixed bed and fluidized bed gasifier.
Raw Material :
Technology Advantages1) Technical advantages: Circulating fluidized bed, advanced technology, large and stable gas production, and can start power generator unit in 20 minutes.
2) The original advanced gas purification technology, high gas cleanliness, prolongs the service life of the engine and generator set.
3) Under the conditions of the same gas production and power generation, the equipment is small in size, less footprint area require, flexible layout, and easy to operate and maintain.
4) The whole system and auxiliary equipment are all designed with high-grade explosion-proof design technology, which is more safe and reliable.
5) Energy-saving advantages: 60%-80% energy saving than natural gas and liquefied gas, high thermal efficiency
6) Environmental advantages: Dust-free emission during operation, safe and environmentally friendly
7) Return on investment: centralized gas supply and power supply, recovery of investment cost within 8 to 12 months, low energy consumption and significant economic benefits
Process
More detail
Our Service
The specification of biomass gasifier Model | HBF-150W |
Type | Downdraft type fixed bed |
Gas output | 150m3/h |
Consumption Material | 70-75kg /h |
Heat value of Gas | 1200-1500Kcal/Nm³ |
Gasification efficiency | >80% |
Draught fan Power | 220V (Standard power,50Hz) |
Application | To run 50 KW Biomass Generator Set |
| | |
Raw material : Rice husk, woodchips, sawdust, bark, shavings, crop stalks, coconut hull, olive pomace, bagasse., plastic waste , palm tree .cotton straw ........ |
Requirement of the feedstock particle size is ≤5 cm, moisture content ≤20 %. |
Biomass fuel gas composition |
CO | 20%--22.5% |
H2 | 10%--12.6% |
CH4 | 2%--4% |
CO2 | 13% |
O2 | 1% |
N2 | 46%-50% |
H2S | 14--16.4mg/Nm3 |
Scope of Supply : |
Items | Parts | Remarks |
Gasifier | Body of gasifier | Generator gas |
Hopper feeder | Transport material |
Feed connector | Assort |
Screw ash machine | Mechanical clean ash |
Dust hopper | Temporary ash storage |
Pneumatic disc valve | Ash machine closed valve |
Air pump | Power of pneumatic disc valve |
Dust remover | Cyclone ash separator | Remove the ash |
Pneumatic disc valve | closed valve of dust remover |
Cooler | | Gas cooling , waster heat recovery |
Tarpurifier | Contains 4 sets tar remover | Separate tar |
Centrifugal separator | | Separate tar |
Filter | | Separation pf tar , water |
Roots blower | | Gas Transportation |
Splitter | | Gas shunt output |
Filtering cleaner | | Clean the gas |
One-way valve | | Stop the gas back flow |
Circulating water pump | | Assort |
Electric control cabinet | | |
Attachment 2 :50kw biomass generator set1.Characteristics of Biomass Gas Engine and Its:
1) The external components (such as spark plug, mixer, electronic governor, ignition controller, etc.) all use high-quality products to ensure the quality and reliability of the straw gas machine.
In order to improve the sealing performance of the valve work, the intake and exhaust valves are equipped with valve rotation mechanism, which can work at the same time. Reduce the combustion of carbon deposits caused by uneven gas valve leakage.
2) generator sets imported by the brushless excitation of the production of non-polar motor, advanced motor design, high insulation, sensitive and reliable voltage regulator system. The control panel uses the domestic high quality main switch and the controller.
3) The unit set up all kinds of necessary safety protection device. Including speeding, low oil pressure, the machine water temperature high automatic alarm, off the gate, shut down. Oil and water temperature is high, the generator over-current, under-voltage protection; parallel (or grid) units of the reverse power gate, alarm protection. In the control panel with emergency stop button, the unit can be an emergency shutdown failure. Outer leakage of the moving parts are equipped with beautiful and safe protective cover.
4) The control panel is separately set to the floor cabinet structure, the control screen is equipped with the main switch, a variety of display instruments, adjustment knob, unit protection devices and indicators. Can be compartment monitoring the operation of the unit; control unit operating load; adjust unit operating parameters and unit operation.
5) The mixer uses the throat type mixer to increase the starting manifold, extremely easy to start, the automatic double disc voltage control. According to different conditions to adjust the gas mixture to ensure the realization of lean combustion.2.environment condition: The biomass gas generator environment temperature in -20 ºC ~ + 45 ºC , relative humidity < 90% (20 ºC), altitude 1200 m or less environmental conditions can be stable and reliable operation.Under the standard conditions (atmospheric pressure is 100 kpa, the environment temperature 25 ºC, air relative humidity 30%) can output rated power , and continuous operation.3.Gas conditions: Biomass gas calorific value: 1200~1500 Kcal/m3Requirement of gas quality index of biomass generator setItem | Index | Item | Index |
Calorific value of gas | ≥4000KJ/ m3 | Hydrogen content | ≤10 %(Volume percentage) |
Total sulfur content | ≤200mg/ m3 | Gas source pressure | 10~100kPa |
Tar content(mg/m3) | ≤50 |
Biomass gas should be processed. no liquid component, gas impurity particle size should be ≤0.005mm, the content is not greater than 0.03g/M3. |
4.Main technical parameters of gas generator set:4.1The main parameters of generating sets are as follows:Genset model | HTG-50GF |
Rated power | 50Kw/62.5kVA |
Standby Power | 55kw/68.75KVA |
Rated Frequency | 50Hz |
Rated Voltage | 380v/220v |
Power Factor | 0.8 |
Rated Current | 90A |
Rated Speed | 1500r/min |
Speed regulation mode | Electronic speed regulation |
Starting method | 24V DC electric starting |
Dimension(MM) | 2400 L *800 W*1450 L |
4.2 Main technical parameters of engine:Engine model | HT615G |
Engine brand | weichai |
Engine Type | In line, Four Stroke, Electronic Ignition |
Cylinder No. | 6.L |
Bore ×Stroke | 126mm×130mm |
Total Displacement | 9.7L |
Rated speed | 1500r/min |
Rated power | 65kW |
Compression ratio | 10:1 |
Crankshaft Rotation Direction | Inverse Hour (From Flywheel) |
Biomass gas Consumption (m³/Kw·h) | ≤2.8 |
Gas Mixer Formation | Pre-Mix |
Oil consumption rate | ≤1.0g/kW.h |
Lubricating oil Temprature | <80ºC |
Lubrication mode | Pressure and splash lubrication |
Cooling Method | Closed Water Cooling |
Max -exhaust Temprature | 600ºC±25 |
Speed Governor | Electronic |
Dimension(MM) | 1100 L *700 W*1400 L |
4.3 Parameters of alternator:Brand | Faraday/FD2C-4 |
Rated Power | 50kw/62.5kva |
Rated Voltage | 380v/220v |
Rated Current | 90A |
Rated Speed | 1500 rpm |
Connection Type | 3 P 4 W |
Power Factor | 0.8 (LAG) |
Excitation Type | Brushless |
Insulation Class | H |
Protection Class | IP23 |
Voltage Regulation Mode | AVR (Automatic) |
5.Electrical performance index of generating set:Voltage:Steady state regulation rate(%):≥±2.5 Transient adjustment rate(%):≤+20(-15) Stable time(S)≤1.5 Fluctuation rate(%):≤1.0 Frequency:Steady state regulation rate(%):0~5 Adjustable Transient adjustment rate(%):≤±10 Stable time(S)≤7Fluctuation rate(%):≤1.0
Address:
Room610 Buildin 24 Zhongjiang Decoration Plaza, Taizhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Electrical & Electronics, Health & Medicine, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Security & Protection, Textile, Toys
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, ISO 14064, QC 080000
Company Introduction:
We Royal Power specialize in assembly, design, sales, installation, maintenance and service of diesel generators, diesel engines, Gas, biogas, dual fuel, HFO, high speed, middle speed power generators, Power plants with and without CHP or CHP, Sound and weather proof canopies, special containers, mobile power generation, Transformer substations, synchronization panels, and ATS Panels. We have vast experience to design install and maintain power plants around the world with our best world class expertise and engineers. We establish international manufacturing standard, structure and highly qualified staff to maintain quality. Leading diesel, natural gas, biogas, dual fuel, Middle speed engines manufacturer within the range of 220 KW to 2722 KW. Our company′s main products are A Series diesel gensets. Include CUMMINS diesel gensets, TIANJIN LOVOL (Its predecessor is PERKINS) diesel gensets, DOOSAN diesel gensets, DEUTZ diesel gensets and China-made diesel gensets, Gas gensets, narine gensets.
Since 2015, we also export cold storage room, refrigeration equipment, medical protetive items(surgical masks, gowns, gloves, protetive clothing, etc).